Data loading...

Mi Robot Vacuum-Mop P
Switch To Smart Automatic Home Cleaning
2-in-1 Sweeping & Mopping Function
2100Pa Powerful Suction
LDS Laser Navigation
Accessories and Consumables
MultiMap Support
Automatic Recharge and Resume
Smart App and Voice Control
Anti Fall and Anti Collide Sensors
2-in-1 Sweeping and Mopping
Sweeping & Mopping Mode
Works with 2-in-1 tank
Sweeping Only
550ml large dust box
Mopping Only
2-In-1 tank
Accessories and Consumables
Easy to purchase consumables and spare parts such as middle brushes,
HEPA Filter, wet and dry mop, cleaning brushes directly from
Intelligent Mapping and Route Planning
The new LDS Laser Navigation System works with an upgraded SLAM algorithm for real-time mapping, faster speed, higher accuracy, and longer scanning range. The robot smartly deals with complicated surroundings and scans the entire floor meticulously.
Scanning Range
Scanning Frequency
2016 times/s
Sampling Rate
Accuracy Deviation
Automatic Recharge and Resume Feature
The device can automatically go to its charging point and resume cleaning from the breakpoint if it ever runs out of battery midway.
Resume from Breakpoint
Automatic Recharge
Ultimate Power Machine
With a powerful 2100Pa suction and high-end brushless motor, you can achieve thorough cleaning of dust and debris in no time. This coupled with the 3200mAh battery makes your life way easier.
Equipped with
and other
The 12 sets of high-precision sensors help in an accurate depiction of the surroundings. Powered by an anti-collision and an anti-drop sensor, the device makes accurate navigation, crosses obstacles up to 2cm height, avoids any fall from the staircase and senses the surrounding environment intelligently.
Smart Electronically Controlled Water Tank
Engineered with an electronically controlled pump, it comes with 3 gears of water dispensing modes and a water clogging prevention mechanism. Choose modes based on the intensity of cleaning and the type of floor you want to clean.
Smart Electronic Water Tank
3 Gears of Water Supply
Electronically controlled Pump
Intelligent Water Dispensing
Edge Cleaning
The device can be used to clean the corners efficiently. With the "Vacuum along the edges" option in the Mi Home app, you can map your home quickly which would reduce mapping time by 60%
Spot Cleaning
Cleans on a selected designated spot
Zone Cleaning
Select an area in the Mi Home app and the device will clean the selected zone
Set a cleaning time as per your need

Mi Robot Vacuum-Mop P

The Modern Pro Cleaning Solution

Mi Robot Vacuum-Mop P is a modern day wonder with incredible features to make your daily life much easier than before. It is loaded with features like 2-in-1 Sweeping and Mopping which does the daily chores like sweeping, mopping, sweeping and mopping effortlessly. It is equipped with an LDS Laser Navigation System that works with an upgraded SLAM algorithm for real-time mapping, faster scanning and longer scanning range.

Mi Robot Vacuum-Mop P Features:
ItThe robot comes with a professional mopping path design specially created for Indian homes.
It is equipped with 12 sets of high precision sensors that help in accurate depiction of the surroundings.
It\'s also powered by an anti-collision and anti-drop sensor and it crosses obstacles up to 2cm in height.
The vacuum robot has a powerful data processing capability and powered by a Cortex-A7 Processor and Mali 400 GPU.

With a powerful suction of 2100Pa and a smart electronically controlled water tank, this robot makes your life very easy.

You can also connect to the Mi Home app to explore a plethora of options like remote control, real-time mapping, scheduled cleaning, spot cleaning etc. You can also choose to merge, divide or name a room for cleaning. The dynamic path planning helps in following different paths for different modes. The device can automatically recharge and resume whenever required.

You can also set virtual walls or restricted areas around objects to avoid cleaning restricted areas like carpets or washrooms. The vacuum robot has a powerful data processing capability and powered by a Cortex-A7 Processor and Mali 400 GPU.

  • Name Mi Robot Vacuum-Mop P
  • Dimensions Ø 350 X 94.5mm
  • Battery Capacity 3200mAh
  • Wi-Fi 2.4GHz 802.11 b/g/n
  • Running Time 60-130 minutes
  • Weight 3.6kg
  • Rated Power 33W
  • Working Noise ≤70dB (Standard mode)
Package List
  • Mi Robot Vacuum-Mop P 1U
  • User Manual 1U
Accessories Installed in the Main Unit:
  • Large Dust BoxU (Used in sweeping mode) 1U
  • Cleaning Brush 1U
  • Roller Brush 1U
Other Accessories:
  • 2-in-1 Tank
    (Used in sweeping + mopping)
  • Side Brush 2U
  • Charging Base 1U
  • Adapter 1U
  • Drag Bracket 1U
  • Full-wet Mop 1U
  • Semi-wet Mop 1U
Mi Robot Vacuum-Mop P
Pair your device
to Mi Home App
How to Use Google Assistant
for functionalities
Use Different Modes
For Mopping and Cleaning
Set Up Scheduled Cleaning
on your Mi Robot Vacuum Mop-P
Set Virtual Walls
for effective cleaning
Clean Dust and Water Tank
on your Mi Robot Vacuum Mop-P
Maintain your Mi Robot Vacuum Mop-P
  1. What is the warranty of the product

    The product comes with a 1-Year warranty on manufacturing defect. Consumables not covered under warranty

  2. How can I get consumables like mopping mat and sweeping brush?

    Consumables can be purchased from nearest Xiaomi Service Center. Call at 1800 103 6286 to connect to Xiaomi Service Center.

  3. How I can get battery replacement?

    Battery replacement will be provided by our After sales team

  4. Will I get a demo of the product at home when I buy the device?

    Yes. Demo/Installation will be provided upon receiving request from consumer.

  5. Can I use a disinfectant for the mop? What is the approved disinfectant to be used for mopping?

    It is strictly forbidden to use the cleaner like detergent, disinfectant or solid cleaner, as these may cause clog, or corrosion to the 2-in-1 dust compartment with water tank. Please regular clean the filter of the filling opening.

  6. Does it work on a wet floor?

    It is not advisable to use the machine on wet floor as during vacuuming liquid can go inside machine and cause damage

  7. Is there an option to replace the mopping cloth attached to this device?

    Yes. Mop cloth can be replaced. Please refer user manual for details.

  8. What is the lowest height the vacuum cleaner can pass under?

    It can pass in a gap of 10cm or above.

  9. What should I be aware of before using the vacuum-mop?

    Please tidy up cables, and remove any objects that are easily knocked over, fragile, valuable, or potentially dangerous so as to avoid the vacuum-mop from getting entangled, stuck, or dragging around or knocking over objects and causing personal injuries or property damage. Please follow the vacuum-mop during its first clean-up to help it deal with minor issues that may exist. After the initial clean-up, the vacuum-mop can clean-up independently. In clean-up mode the dust compartment or the 2-in-1 dust compartment with water reservoir can be installed. It is recommended to vacuum before mopping when there is too much dust on the floor.

  10. Is the laser distance sensor harmful for eyes, children or pets?

    The red laser ray emitted by the laser distance sensor complies with IEC60825-1:2014 Class 1 laser safety standards and does not generate dangerous radiation. In addition, the emitted laser power consumption is extremely low, and does not harm children or pets.

  11. Why does the vacuum-mop's cleaning ability decline after a while or leave dust behind?

    Please check whether the dust compartment is full, if so empty it. At the same time, please check the filter and clean it if necessary, and also check whether there is anything wrapped around any of the brushes.

  12. Why doesn't the vacuum-mop return to the dock to charge all the time?

    1. Check whether there are too many obstacles around the charging dock, place the dock in a location without any obstacles around it.

    2. When the vacuum-mop does not start cleaning from the charging dock, it is unable to locate the charging dock and will move around randomly in order to find the dock's signal. If the signal still cannot be found after a long time, it will fail to return to the dock to charge. You will need to manually return the vacuum-mop to the dock to charge.

  13. Why doesn't the vacuum-mop resume cleaning after charging?

    The vacuum-mop will not resume cleaning in do not disturb (DND) mode, or after manually being returned to the dock to charge.

  14. Why is the vacuum-mop unable to return to the dock to charge after a partial clean-up or being repositioned?

    The vacuum-mop will scan its surroundings during a partial clean-up or after being repositioned to generate a map. When the charging dock is too far away, the vacuum-mop will not be able to return to the dock to charge. Please manually return the vacuum-mop to the dock to charge.

  15. Why won't the vacuum-mop carry out the scheduled clean-up?

    1. Check whether the battery level is sufficient, the vacuum-mop needs to have a battery level of 20% or more to start a scheduled clean-up.
    2. Check whether the scheduled cleanup is planned during the do not disturb (DND) period. Scheduled cleanups will not be carried out during the DND period.

  16. What should I do if the vacuum-mop is unable to charge?

    Check whether the cable of charging dock is properly plugged in at both ends, and whether the charging contacts are clean. If not, please wipe clean the charging contacts on both the dock and the vacuum-mop with a dry cloth.

  17. Does the vacuum-mop consume electricity when it is left at the dock after being fully charged?

    When the vacuum-mop is left at the dock, it will consume a small amount of electricity to allow the battery to maintain optimal performance in sleep mode.

See more answered questions ()